MH 2645-270242-33
Premium double needle lockstitch machine with bottom feed, needle feed and alternating top feet.
Equipped with energy efficient, integrated 750W sewing drive and built-in electromagnetic thread trimmer, electropneumatic seam back tacking, sewing foot lift and quick stroke adjustment.
Needle gauge 1/8" to 2".
Highlights
Integrated Direct Drive and Control Panel
Integrated Direct Drive and Control Panel
Integrated Direct Drive and Control Panel
With the integrated 750W direct drive you can handle all kinds of sewing operations.
The integrated control panel allows easy access to the main sewing parameters and cares for a clean setup of the machine.
Quick Stroke Adjustment
Integrated Direct Drive and Control Panel
Integrated Direct Drive and Control Panel
The dial allows you to set your sewing foot stroke for your common sewing operation and benefit from maximum sewing speed.
To climb over cross seams just activate the maximum foot stroke by pughing the knee switch. Machine speed will be reduced automatically. Pushing the knee switch again will get you back to your stanbdard foot stroke.
XXL Sewing Hooks
Integrated Direct Drive and Control Panel
XXL Sewing Hooks
Benefit from the extra XXL hooks used in the Mauser Spezial MH-2646. The 32mm bobbins will keep your machine going with less down time for bobbin changes.
Asymmetric Needle gauge (Optional)
Asymmetric Needle gauge (Optional)
Asymmetric Needle gauge (Optional)
The asymmetric needle gauge is the perfect choice for smaller shops using only one machine for double and single needle operations.
Just take out the left needle and change the double needle sewing feet to the single needle ones and you are good to go.
Asymmetric Needle gauge (Optional)
Asymmetric Needle gauge (Optional)
Asymmetric Needle gauge (Optional)
.